Basic Functions; Activating And Deactivating; Connecting The Subwoofer And Cinebar 11 - Teufel Cinebar 11 Technical Description And User Manual

Basic Functions

Activating and deactivating

Cinebar 11
• Switch your Cinebar 11 on or to standby with the
button (16).
(4) or
• If the Cinebar 11 does not receive any signal for
more than 20 minutes, it will automatically switch
to standby. All control LEDs will then be switched
off.
Subwoofer
• The subwoofer will switch on when it is connected
to the mains.
• The subwoofer will automatically switch to
standby if it doesn't receive a signal for a certain
amount of time. It will turn back on once a signal
is received.
• You can switch it manually to standby and back on
using the POWER/STANDBY button (12).
• When activated, the LED POWER (13) is illuminat-
ed.
Connecting the subwoofer and
Cinebar 11
After you have switched your Cinebar CB 11 SB
on and connected the subwoofer CB 11 SW to the
mains, the subwoofer will search for a Cinebar that
has already been connected. During this phase, the
LED PAIRING STATUS (14) will blink slowly.
The Cinebar and subwoofer should have paired with
one another after a short time. The LED PAIRING
STATUS (14) will then be illuminated permanently.
If the devices do not connect with each other auto-
matically, please proceed as follows:
1. Hold down the PAIRING button (11) until the LED
PAIRING STATUS (14) blinks quickly.
2. Access the menu using the MENU button (21).
button, select the menu item WS and
3. Using the
confi rm with the OK button (32).
4. Then, confi rm the items LINK and START as well.
The display will show the blinking SEARCH indicator
now.
OK will appear on the display after a few seconds.
The connection has now been established.
5. Press the MENU button (21) again to fi nish the
operation.
• Cinebar 11
12
AUDIO
IN
16
DIGITAL
32
4
11 13
12 14
21
DIGITAL