Door Handle Fitting Instructions - Hotpoint FFLAA58WDW Service Information

Indesit Company
Fitting The Door Handles (not fitted when delivered)
With the screw covers removed (unclipped), align the holes in each Door Handle End Cap with the
corresponding holes in the edge of each door.
Using a suitable Philips screwdriver, fit a screw through each End Cap hole into the door screw hole
and tighten securely.
Once secured, clip the screw covers over the End cap moulding.
Unclip the Screw Cover from the Handle End Cap.
Arrows show clip locations.
Handle Bar
DOOR SIDE / REAR VIEW - screw cover removed
Screw
Cover
Service Manual UK
Screw Cover
Handle End Cap
Handle End Cap
OUTSIDE VIEW - screw cover removed
Screw
Hole
Screw
Cover
Handle shown screwed to the door.
Attach the screw cover over the handle
end cap and clip into position
Screw
(Qty 2
per
handle)
9 of 18
Handle End Cap
English