Digital Fixed Station Interface (Dfsi); Programming The Kng Mobile For Dfsi Operation - RELM KNG Series Programming Manual

10 Digital Fixed Station Interface (DFSI)

RELM KNG Series mobile radios can be configured to use the P25 DFSI. This allows connection via IP
networks for voice and control operation. A PC based interface application is available from RELM, or a
third party DFSI complaint console can be used. The feature requires use of radio firmware 5.0.0 and
above, NeoVision 2.0.0 and above.

10.1 Programming the KNG Mobile for DFSI Operation

The DFSI interface is configured via the Fixed Station window which is found on the
Global/Common/General page of NeoVision programming software.
Enter an appropriate IP Address, Subnet Mask and Default Gateway for your IP Network. If you are
unsure of appropriate values, from a computer connected to the network, open a command prompt and
type ipconfig. The utility will return the IP address, Subnet Mask and Default Gateway of the computer's
Ethernet adapter.
KNG Series Trunked Radio Programming Guide Page 51 of 57
July 2014