Related Manuals for Technical Pro RX38Ur
Summary of Contents for Technical Pro RX38Ur
- Page 1 RX38Ur 1000 Watts Technical Pro Professional Receiver with USB & SD Card Inputs Compatible with iPod™ User Manual for: RX38Ur...
- Page 2 If you've spent any time at all in professional audio, you know the name Technical Pro and what it stands for — incredible performance &...
- Page 3 RX38Ur RX38Ur Front Panel RX38Ur 1000 Watts 1.Power:Press this button to power the unit on and off. 2.TUNING:Use this knob to manually scan through the FM stations. The input must be set to TUNER in order to play the signal from the tuner.
- Page 4 RX38Ur 8.Previous Button: Press this button to go back to the beginning of the previous track on either the USB flash drive,SD card or iPod™(Classic and Nano). 9.Next Button: Press this button to go to the beginning of the next track on either the USB flash drive, SD card or iPod™(Classic and Nano).
- Page 5 1.Power Supply: Only use the power cord provided with the unit to power the RX38Ur. When connecting and disconnecting the power cord, be sure the power of the RX38Ur is off. Connect the cord to the rear of the RX38Ur and then connect it to the outlet.
-
Page 6: Remote Control Operation
RX38Ur Remote 1.Input Selector: Use this button to switch between the inputs. 2.EQ Mode Selector:The RX38Ur has four built-in pre-set equalization modes. Press this button to switch between the pre-set equalization modes. 3.Number Keys: The number keys are used to input the track number. For example if you press 6-4-3 then ENTER the unit will go to track number 643 on either the USB flash drive,SD Card or iPod™(Classic and Nano). -
Page 7: Powered Subwoofer
In the typical setup, a user should wire from the output of the signal source directly to one of the RCA inputs on the rear of the RX38Ur. Once the input signal source is connected to the RX38Ur, connect the speakers to the RX38Ur’s main outputs. Pictured above is an iPhone and DVD player connected to the RX38Ur inputs. - Page 8 10 mm (0.4 in) 2.Unscrew the main speaker output terminal on the rear of the RX38Ur.Insert the exposed speaker wire into the opening. 3.Tighten the knob.
- Page 9 MP3 Player There are also SD Card and USB flash drive inputs on the front panel of the RX38Ur which is compatible with iPod™ (Classic and Nano) via the USB input. The maximum size of the SD Card or USB flash drive is 32GB. If your memory card exceeds 32GB, the unit will not be able to read the files from the memory cards.
-
Page 10: Ac Power Cord Connection
To connect the power cord to your RX38Ur simply plug female side of the power cord into the power cord input which is on the rear of the RX38Ur. Then plug the male side of the power cord to an electric outlet.The AC power cords supplied purposefully have 2 blades and one grounding prong. -
Page 11: Screen Display
RX38Ur Connecting the RX38Ur to Passive Loudspeakers The RX38Ur is designed to power up to two full-range passive loudspeakers and three surround speakers. The speakers should be connected via the speaker wire outputs on the rear of the RX38Ur. NOTE: WHEN MAKING THESE CONNECTIONS THE POWER OF THE RX38Ur AND THE SIGNAL SOURCE SHOULD ALL BE IN THE OFF POSITION WITH THE VOLUME LEVELS TURNED DOWN.ONCE...
Need help?
Do you have a question about the RX38Ur and is the answer not in the manual?
Questions and answers