Smartgen HGM6100K Series Operating Manual page 13

Pin Function
input
15 Magnetic pickup +ve
16 Magnetic pickup -ve
17
Temp. sensor input
18 Oil pressure input
19 Liquid level input
20 Auxiliary input 1
21 Auxiliary input 2
22 Auxiliary input 3
23 CT Secondary for A
24 CT Secondary for B
25 CT Secondary for C
26 CT secondary common
Generator A voltage
27
monitoring
Generator B voltage
28
monitoring
Generator C voltage
29
monitoring
30 Generator Neutral input
Mains A voltage
31
monitoring
Mains B voltage
32
monitoring
Mains C voltage
33
monitoring
34 Mains Neutral input
35 RS485 port common
36 RS485 port A(-)
37 RS485 port B(+)
38 Auxiliary input 4
39 Auxiliary input 5
40 Common port
Note: LINK interface in back is as a parameter programming interface, by PC to
programmable controller via SG72 adapter.
HGM6100K Series Automatic Generator Module
HGM6100K Series Automatic Generator Module
Dim
Connect to Magnetic Pickup device.
Connecting
temperature resistance type
sensor.
Connect to oil pressure sensor.
Connect to liquid Level sensor.
1.0mm
1.0mm
1.0mm
1.5mm
1.5mm
1.5mm
1.5mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
1.0mm
0.5mm
0.5mm
0.5mm
1.0mm
1.0mm
1.0mm
Description
water/cylinder
Switch to -ve
Switch to -ve
Switch to -ve
Connect to secondary of A
monitoring CT
Connect to secondary of B monitoring
CT
Connect to secondary of C monitoring
CT
Connect to secondary of all monitoring
CT‟s
Connect to Generator A output
(Recommend 2A fuse)
Connect to Generator B output
(Recommend 2A fuse)
Connect to Generator C output
(Recommend 2A fuse)
Connect to generator neutral
terminal (AC)
Connect to mains A output
(Recommend 2A fuse)
Connect to mains B output
(Recommend 2A fuse)
Connect to mains C output
(Recommend 2A fuse)
Connect to mains neutral terminal
Use only 120Ω RS485 approved cable.
Switch to -ve
Switch to -ve
Auxiliary input common port
ISSUE 2011-04-12 Version 1.6
Reference
table 4
Reference
table 3
Reference
table 3
Page 13 of 31