Admiralty Information Overlay (Aio); Installation; How To Display The Aio - Furuno FMD-3200 Operator's Manual
Electronic chart display and information system
Hide thumbs
Also See for FMD-3200:
- Operator's manual (450 pages) ,
- Installation manual (142 pages) ,
- Instruction manual (133 pages)
Table of Contents
Advertisement
5.5
Admiralty Information Overlay (AIO)
The Admiralty Information Overlay includes all Admiralty Temporary and Preliminary
Notices to Mariners (T&P NMs) and provides additional navigationally significant in-
formation from UKHO's ENC validation programme. The AIO is displayed as a single
layer on top of the basic ENC and is available free of charge as part of the Admiralty
S57 Chart Service and within Admiralty Value Added Resellers' services.
The AIO has been developed to ensure mariners can simply view the information they
need - in addition to the standard chart - to navigate safely and compliantly. By clearly
showing where important Temporary or Preliminary changes may impact a voyage,
the Admiralty Information Overlay will give seafarers the same consistent picture of
the maritime environment on their charts as they have always had.
The AIO license is free of charge for AVCS license holders.
5.5.1
Installation
Installation is the same as that for the ENC chart. See section 3.2.
5.5.2
How to display the AIO
On the InstantAccess bar
AIO. To hide the AIO, click the [DISP], [NtoM] and [OFF] buttons.
The area(s) that contain temporary or preliminary changes are marked as a hatched
red area.
™
, click the [DISP], [NtoM] and [ALL] buttons to show the
5. VECTOR (S57) CHARTS
5-9
Advertisement
Table of Contents
Troubleshooting
Need help?
Do you have a question about the FMD-3200 and is the answer not in the manual?
Questions and answers
Why is it that my furuno ecdis screen is full of msi when I turn on the navtex
The delete chats butten does not light up to allow me to Press it
What does the alert number 455 indicate?