Thermoplastic Hot Melt Material; Equipment And Material Disposal - Nordson foammelt 200 Product Manual

A 1-8 Safety
9. Thermoplastic Hot Melt
Material
10. Equipment and Material
Disposal
A1EN- 02- [XX- SAFE]- 1
NOTE: Always refer to the material manufacturer's Safety Data Sheet
(SDS) or material information sheet before working with any hot melt
material.
S
Ensure the work area is adequately ventilated.
S
Do not exceed recommended processing temperatures. Doing so
creates a danger to personnel due to decomposition of the material.
Dispose of equipment and materials used in operation and cleaning
according to local regulations.
321222_06
Issued 04/2015
E 2015 Nordson Corporation
All rights reserved