Removing The Shelf Supports - Lamona LAM3702 User Manual

• Clean the appliance interior after each use. Fat accumulation or other food remains may
result in a fire. The risk is higher for the grill pan.
• Clean stubborn dirt with a special oven cleaner.
• Clean all accessories after each use and let them dry. Use a soft cloth with warm water
and a cleaning agent.
• If you have nonstick accessories, do not clean them using aggressive agents, sharp-
edged objects or a dishwasher. It can cause damage to the nonstick coating.
• Dry the oven when the cavity is wet after usage.
Stainless steel or aluminium appliances
Clean the oven door with a damp cloth or sponge only. Dry it with a soft cloth.
Do not use steel wool, acids or abrasive materials as they can damage the oven
surface. Clean the oven control panel with the same precautions.

Removing the shelf supports

To clean the oven, remove the shelf supports.
1. Pull the front of the shelf support away from the side wall.
2. Pull the rear end of the shelf support away from the side wall and remove it.
1
Install the shelf supports in the opposite sequence.
The retaining pins on the telescopic runners must point to the front.
Pyrolysis
CAUTION! Remove all accessories and removable shelf supports.
The pyrolytic cleaning procedure cannot start:
• if you did not fully close the oven door.
Remove the worst dirt manually.
34
2