Adjustment Spec. Test Point Adjustment Location TDV-533 “ENV” Screw A / B Chapter 14 Flat Waveform (Main PCB - Component Side) Ass’y Deck - Top Side (See Fig. 2-1) (See Fig. 2-2) Fig. 2-2 Ass’y Deck (Top Side) Samsung Electronics...
Page 13
If you cannot obtain a Flat waveform, then the unit is defective. Note : The Deck must be in a horizontal position. Use both “A” and “B” screws to adjust. Typical Waveform before Adjustment Waveform after Correct Adjustment Fig. 2-3 Envelope Waveform Samsung Electronics...