Tiller Handle Throttle Cable Replacement - Mariner 30 JET 40 (4 CYL) Service Manual

Tiller Handle Throttle Cable
Replacement
1. Remove tiller handle from outboard.
2. Remove throttle twist grip.
3. Loosen screws (a) securing cable guide (b) to
throttle cable (c).
c
b
a
4. Remove conduit (a) and throttle cable from tiller
handle.
7B-2 - OUTBOARD MOTOR INSTALLATION/ATTACHMENTS
54819
a
54820
5. Install throttle cable.
a. Position drive rod flat surface parallel to work
surface.
a - Drive Rod
b. Rotate drive rod (either direction) 1/8 turn to
attain drive rod flat surface of 45 .
1/8 Turn
90-814676R1 DECEMBER 1996
a
54821
(45_ Angle)
54822