Before Operation - Vcr Part; Using Your Dvd+Vcr For The Very First Time; Setting The Clock Manually - Philips 721VR Owner's Manual

Before Operation - VCR part

Using your DVD+VCR for the
very first time
For the following steps we assume that you have just
connected your DVD+VCR for the very first time.
To make tuning TV stations an easy task your DVD+VCR
incorporates the Automatic Channel Memory
System (ACMS).This system will automatically tune,
store TV channels and set the clock (date & time) in your
DVD+VCR.
IMPORTANT!
If you have used a RF Antenna input connection,
refer to 'TV with RF Input only' on page 13.
1
Make sure that you have correctly installed your
DVD+VCR.
Press 1 1 to turn on your DVD+VCR.
If the initial Menu Screen doesn't appear on screen, make
sure that you have tuned your TV to a video channel. Or if
this is correct it may mean that your DVD+VCR is already
tuned.
2 Press b or B to select the desired country.
(A: Austria, B: Belgium,CH: Switzerland, D: Germany, DK:
Denmark, E: Spain, F: France, I: Italy, N: Norway, NL:
Netherlands, P: Portugal, S:Sweden, SF: Finland, OTHERS)
3 Press OK to start the automatic tuning process.
01 C02
02 C03
03 C04
S
Pr-12
ACMS
Programme number TV Station
PR01 ARD
PR02 ZDF
PR03 WDR 3
PR04 BR3
PR05 HR3
PR06
NDR3
The TV station shown above may vary according to the
area you live in.
4
Press SYSTEM MENU to remove the menus from
the TV screen.
12
00 ARD
00 ZDF
00 WDR 3
E
i

Setting the clock Manually

The clock in your DVD+VCR controls time and date
settings for your DVD+VCR.
The clock is set automatically during ACMS (Automatic
Channel Memory System) when you DVD+VCR detects a
channel that broadcasts a Teletext signal. If the broadcast
signal is weak the clock will not be set and will require
setting manually.
1 Press SYSTEM MENU.
Press b or B to select TIME DATE.
Press OK.
The auto adjust mode can be set to 'OFF' by pressing 3
or 4 if you want to set the time manually.
Press OK.
AUTO ADJUST
: ON
- -
1 2
TIME
OK i
DATE
2
Use the numbered buttons on the remote control to
alter the HOURS, MINUTES, DAY, MONTH and
YEAR.
Please note your DVD+VCR uses a 24 hour clock. e.g.
1pm will be displayed as 13:00.
The day of the week will appear automatically when you
enter the year.
HH MN DD
8 : 00 1
1 2
TIME
DATE
3
If you make a mistake press b b or B B and enter the
correct details.
4
Press SYSTEM MENU.
HH MN DD MM YY
- - : - - - - . - - . - - - - -
1 2
TIME
i
DATE
MM YY
. 01 . 04 THU
i