Figure 1-13 Show connection status by using WZC to initiate the connection
1.2
Windows AutoConfig Service for Vista
1.2.1
Ralink Wireless Utility and Windows AutoConfig Service
In Windows Vista, the Auto Config service provides basic wireless configuration
functions for the Ralink Wireless Network Interface Controller. In order to perform
these functions, the Auto Config service should first be enabled (Refer to Section
1-2-2).
Once the Ralink wireless utility is minimized, click the Ralink icon as shown in
Figure 1-1. This will bring up the option menu shown as Figure 1-2 for the user to
restore the utility window or terminate the utility.
Figure 1-1
Figure 1-2
11/113
Need help?
Do you have a question about the LP-7617 and is the answer not in the manual?