, the more he can do for you. Your travel buddy is smart and you will find adventures are smooth under his guidance. Take care of Firefly he will take care of you. And no matter what your final destination is, don’t forget to enjoy the journey!
DE VI CE G UI D E DE VI CE G UI D E Led Status Light Magnetic Lid Heating Chamber Window Lid Gasket Heating Chamber Borosilicate Glass Vapor Path Laser Drilled Microjets Removable Mouthpiece Fresh Air Intake Magnesium Alloy Chassis Capacitive Touch Sensors Battery Compartment VAPOR PATH...
Page 4
• For fastest charging: use a wall adapter that is 9 Watts or higher (i.e. tablet adaptor) and Firefly will charge in 45 minutes or less. Lower wattage adaptors (like a cell phone or computer...
US I NG LO OS E L E A F PACKING LOOSE LEAF Y E S • Remove the magnetic lid by lifting up on either side. • Use hand-torn or coarsely-ground material. • Loosely fill the glass chamber slightly past the rim and tamp down gently.
Page 6
To further customize vapor, see the Tips and Tricks section later in this document. The Firefly will turn off after 30 seconds of holding the sensors, and the heating coil will not glow as bright towards the end of a vape session. PLEASE NOTE:...
US I NG CO N CE N T R ATE S PACKING CONCENTRATES • For optimal concentrate use, download the Firefly app and use the “Concentrates” setting. • Place concentrate pad in heating chamber and press firmly into the bottom of the heating chamber.
Page 8
US I NG CO N CE N T R ATE S VAPING CONCENTRATES • Touch and Glow! Place fingers on touch sensors to start heating. • The LED will blink green for a few seconds and turn solid green when it’s ready. •...
• Insert battery into compartment and slide cover back into place. • Replace battery door: place door on the back side of Firefly , with the arrow side closest to the mouthpiece, positioned just above the edge of the Firefly .
Page 11
F IR EFLY A PP The Firefly app is free and available to download at the iTunes and Android app stores, or at www.thefirefly.com/support SETTINGS PAGE • Set heating profile • Customize touch sensor activation • Check battery level • Connect Device INFORMATION PAGE •...
F IR EFLY AP P PAIR YOUR DEVICE • Firefly must be fully charged and Firefly app must be open. • Place fingers on Firefly touch sensors, the LED will blink green, then release. Firefly is now in listening mode.
Page 13
F IR EFLY AP P HEATING PROFILES • Choose from 6 pre-set temperatures • Once the heating profile is set in the app, Firefly will remain in that temperature setting until another heating profile is selected. The default setting is Medium High, at 400°F.
Page 14
F IR EFLY A P P FIRMWARE UPDATE • Download the latest version of the Firefly app. • Connect your device. • If a new version of firmware is available, a window will pop up saying “Firmware Update Available.” Click “Update.” •...
Page 15
F IR EFLY A P P POWER TUNING Give your vapor production a boost with the Power Tuning feature. Adjust the universal temperature output of your device, one percent at a time! Open Power Tuning from the Settings menu. • •...
BATTERY LIFE • Keep Firefly on charging dock to ensure a charged battery. • Only activate touch sensors while you are vaping and remind your friends of this when they vape with Firefly for their first time. CONCENTRATES • DO NOT overfill pad. If you already overfilled and the concentrate dripped inside the heating element, use touch sensors to heat and blow air OUT to remove matter from inside.
SAFET Y Use only Firefly cleaning implements. Never place the Firefly the following measures: chassis in liquid. Clean the Firefly only when it is cool. • Reorient or relocate the receiving antenna. Please remove batter before cleaning your device. • Increase the separation between the equipment and receiver.
Need help?
Do you have a question about the FIREFLY 2 and is the answer not in the manual?
Questions and answers