Hitachi IJ PH Service Manual page 21

7 View alarm history
screen
8 Circulation control
menu
9 Parts usage time
management
10 Unit information
screen
11 Fault
A memory card with the IJP system data (hereinafter referred to as "system data memory
card") is necessary to carry out the following service personnel maintenance works.
- Be sure to use the system data memory card stored the latest version software.
- Use a CF card (32 MB-2GB Format：FAT16) for memory card.
No. Functions
1 System
environment setup
2 Download
3 Select language
4 Software option
setup
The alarm log can be cleared by the clear key.
The viscometer calibration screen can be selected.
The time of the pump and the solenoid valves can be
changed.
The serial number and the ink coefficient can be changed.
The fault, No ink drop charge, does not invoke ink
stoppage.
Caution
!
The memory card is necessary to change the nozzle
diameter. The card is not required for other setting.
Data for upgrading are stored.
(The memory card is required.)
New language data to save are stored.
The memory card is not required for other setting.
The memory card is necessary to setup the Software
Option. EZJ99 Board is also necessary.
2-3
Contents