Safety Instructions - DeWalt D51238 Original Instructions Manual

E N G L I S H
NAILER D51238
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical data
Type
Recommended operating pressure
Max. operating pressure
Air consumption per shot
Actuating mode
Magazine angle
Fasteners
length
shank diameter
angle
Weight
Sound pressure (L )
PA
Acoustic power (L )
WA
Hand/arm weighted vibration
1)
This value is a tool-related characteristic value and
does not represent the infl uence to the hand-arm-
system when using the tool. The infl uence to the
hand-arm-system when using the tool will for example
depend on the gripping force, the contact pressure
force, the working direction, the adjustment of energy
supply, the workpiece and the workpiece support.
EC-Declaration of conformity
MACHINERY DIRECTIVE
D51238
D WALT declares that these products described
E
under "technical data" are in compliance with:
2006/42/EC, EN 792-13, EN 12549, EN 12096,
ISO 8662-11.
For more information, please contact D
following address or refer to the back of the manual.
20
The undersigned is responsible for compilation of the
technical file and makes this declaration on behalf of
D WALT.
E
D51238
2
Horst Grossmann
bar 4.8 - 8.0
Vice President Engineering and Product Development
D WALT, Richard-Klinger-Straße 11,
bar 8.0
E
D-65510, Idstein, Germany
l 4.5 (at 6.9 bar)
31.12.2009
contact actuating
0°

Safety Instructions

mm 16 – 50
When using tools, always observe the safety
mm 1.2 (18 gauge)
regulations applicable in your country to reduce
0°
the risk of personal injury. Read the following safety
kg 1.27
instructions before attempting to operate this product.
Keep these instructions in a safe place!
dB(A) < 75
dB(A) < 88
m/s 2 2.3 1
General
1. Keep work area clean.
2. Consider work area environment.
3. Keep children away.
4. Store idle tools.
5. Dress properly.
WALT at the
E
READ ALL SAFETY WARNINGS
AND ALL INSTRUCTIONS
Cluttered areas and benches can cause
accidents.
Do not expose tools to humidity. Keep work
area well lit. Do not use tools in the presence of
flammable liquids or gases.
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
Do not wear loose clothing or jewellery. They
can be caught in moving parts. Preferably wear
rubber gloves and non-slip safety footwear. Wear
protective hair covering to keep long hair out of
the way.