1-4: POWER PCB (Refer to Fig. 1-4)
1. Remove the 6 screws (1)
2. Disconnect the following connectors:
(CP7001, CP7002, CP7003 and CP7004).
3. Remove the Power PCB in the direction of arrow.
(1)
1-5: LED PANEL/REMOCON PCB (Refer to Fig. 1-5)
1. Remove the 4 screws (1).
1 Remove the 4 screws (1)
2. Remove the Angle Hing in the direction of arrow (A).
3. Remove the LED Panel in the direction of arrow (B).
4. Remove the Remocon PCB in the direction of arrow (C).
Angle Hing
LED Panel
Remocon PCB
DISASSEMBLY INSTRUCTIONS
(1)
(1)
(1)
(1)
(1)
Power PCB
Fig. 1-3
(1)
(1)
(1)
(1)
(A)
(C)
(B)
Fig. 1-5
B1-2
B1-2