Related Manuals for Cordex Instruments TC7000
Summary of Contents for Cordex Instruments TC7000
- Page 1 HOW TO PROPERLY CHARGE YOUR TC7000/TC7150 BATTERY. WARNING ONLY REMOVE THE BATTERY IN A SAFE AREA. RUGGED AUTHORITY www.cord-ex.com...
- Page 2 To help prevent the battery going into deep discharge which can cause damage, TC7000/7150 incorporates a backup shutdown timer. After 6 hours runtime, the camera shuts down automatically at which point, the battery should be removed and recharged as soon as is safely possible.
-
Page 3: Charging The Battery
INTO THE TC7000/7150 OR POOR RUNTIME AND/OR BATTERY DAMAGE MAY OCCUR. TC7000/7150 will prompt the user on initial camera power up, to confirm that a fresh battery has been installed; • If the user answered Yes, then the battery charge status indicator will be displayed as normal showing a full charge and the six hour safety timer will start. -
Page 4: Troubleshooting
WARRANTY STATEMENT (BATTERIES) CorDEX Instruments Ltd, take great pride in the products we manufacture and warrant our products including batteries to be free from manufacturer’s defects. If your battery fails, we recommend the following: First, determine if the battery needs a boost or replacement. Most batteries that fail are simply discharged and need a boost.
Need help?
Do you have a question about the TC7000 and is the answer not in the manual?
Questions and answers