Table of Contents
Advertisement
®
Sarlo
BigMo™ 30" Hydro Walk-Behind
OWNER'S MANUAL
CONGRATULATIONS on the purchase of your new Sarlo Mower. Your Sarlo is a powerful,
all-purpose power mower, designed, engineered and tested to provide years of trouble-free
operation. With proper handling and maintenance according to instructions in this manual, your
Sarlo will deliver years of dependable service, maximum performance and safety. Be sure to read
and understand all instructions before operation. Inspect mower components, mounting hardware
and lubrication before each use. Our commitment is that every Sarlo will perform to 100% of its
capabilities. We are confident your Sarlo will serve you well for many years to come.
Sarlo Power Mowers, Inc.
Phone: 239.332.1955
Respectfully,
Tony Sarlo, President
P.O. Box 1169
800.749.5296
Fax: 239.332.7212
IMPORTANT:
Date Purchased:
Mower Model #:
Mower Serial #:
Engine Model #:
Engine Serial #:
Dealer:
Fort Myers, Florida 33902
www.SarloMower.com
Advertisement
Table of Contents
Related Manuals for Sarlo BigMo 30 inch
Summary of Contents for Sarlo BigMo 30 inch
- Page 1 Inspect mower components, mounting hardware and lubrication before each use. Our commitment is that every Sarlo will perform to 100% of its capabilities. We are confident your Sarlo will serve you well for many years to come.
-
Page 2: Overview: (Fig. 1.)
Sarlo Power Mowers will repair or replace, free of charge, any part or parts of the mower found upon examination by any Factory Author- ized Dealer or by the factory to be defective in materials and/or workmanship for the term of the warranty. -
Page 3: Before You Mow
While Sarlo Power Mowers, Inc. is dedicated to SAFETY ALERT SYMBOLS: building dependable, high-performance turf equipment, Your Sarlo mower is equipped with Safety Alert Symbols our number one concern is SAFETY. designed to remind and warn operators of specific safety Users must carefully read this Owner’s Manual before... -
Page 4: Safety Interlock System
SAFETY INTERLOCK SYSTEM: For additional safety protection, your Sarlo mower is equipped with Operator Presence Controls, also known as Fig. 4 a Safety Interlock System. The OPC system is designed to prevent the mower from running with blades turning when left unattended, creating Additionally, caution must be used when operators are in unsafe conditions. - Page 5 Adjusting the Height of Cut: Blade Engagement Control. Move the Engine Throttle Fig. 11 Your Sarlo mower offers sev- Control Lever back to the SLOW position. Release the en cutting heights ranging Operator Presence Bale and turn the key in the Ignition from 1.5 to 4.5-inches, in half-...
-
Page 6: Maintenance
Specifications, please refer to the manufacturer’s separate Disengaging the Transmission: The hydrostatic engine manual provided with your mower. transmission of your Sarlo mower has a Release Lever Transmission: The hydrostatic transmission in your on the back of the frame that allows it to be easily rolled mower was designed for extended use in a commercial without the engine running. -
Page 7: Service, Parts & Accessories
Parts and accessories may be purchased through your Sharpening the Cutting Blade: A sharp blade is the local Sarlo dealer. In the event no dealer is available, parts first step in achieving a beautiful cut. can be ordered directly from our factory. -
Page 8: Service Notes
Sleeve, Trans. Idler Bushing 10173 Pulley, Trans. Idler 10178 Wheel/Tire Assembly 10179 Spacer, Wheel 10181 Belt, Transmission 10184 Blade, 30” Mulching 10199 Spring, Return 10214 Weldment, Chute Bracket 10241 Clutch, Electric ® Page 8 © 2016 Sarlo Power Mowers, Inc.
Need help?
Do you have a question about the BigMo 30 inch and is the answer not in the manual?
Questions and answers