Evaluation License Features - Cisco ASR 1001-HX Hardware Installation Manual

Table of Contents

Advertisement

Evaluation License Features

No.
2
3
Evaluation License Features
The following are the features of the 1GE and 10GE Interface Evaluation license:
• There is only one 60-Day Evaluation Period countdown timer for the 1GE port pairs and 10GE port
• A EULA will be presented, and must be accepted, the first time you enable any of the ports in order to
• When the 60-Day Evaluation Period expires, the license automatically changes to an RTU license. As
• There can be only one active interface_1g license and one active interface_10g license. Either the
• As with past license implementations, the Permanent license is of higher precedence than the built-in
Cisco ASR 1001-HX Router and Cisco ASR 1002-HX Router Hardware Installation Guide
108
Scenario
10G SFP+ is on both ports of a
port pair (4 and 5; or 6 and 7)
before using the no shut command
1G SFP is on both ports of a port
pair (4 and 5; or 6 and 7) before
using the no shut command
pairs. The timer is initiated as soon as the first of the port pairs is enabled.
utilize the requested port.
with all other RTU licenses, there is no functionality disruption or accessibility concerns following this
transition.
Permanent License or the EvalRTU License can be Active, but not both.
EvalRTU license. However, when the Permanent license does not have enough port-count (that is, when
the user requests both port pairs but the Permanent License only allows for one port pair), the license
priority changes between the Permanent and Evaluation licenses. In this case, the Evaluation License
becomes Active since it can accommodate both port pairs. The Permanent License will automatically
become Active if and when its port-count meets the user's desired configuration.
Slot 4
Slot 5
or
or
Slot 6
Slot 7
SHUT
SHUT
SHUT
NO_SHUT
NO_SHUT
SHUT
NO_SHUT
NO_SHUT
SHUT
SHUT
SHUT
NO_SHUT
NO_SHUT
SHUT
NO_SHUT
NO_SHUT
License Verification
License
Comments
Usage
No License
This is also
applicable if
10G License
10G SFP+ is
only in one of
10G License
the ports in a
port pair
10G License
No License
1G License
1G License
1G License

Hide quick links:

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ASR 1001-HX and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Asr 1002-hx

Table of Contents

Save PDF