Hooking Up The Tv/Vcr - Philips CCC192AT Owner's Manual

D.
Hooking Up Your TV/VCR to Another Video Source
(VCR or Camcorder)
You may need this connection if you want to copy tapes or view tapes that you are playing on the VCR or
camcorder. Select channel 00 (A/V IN) at the TV/VCR when viewing tapes that are playing on the VCR
or camcorder. Details are on page 31.
AUDIO/VIDEO OUT
Jacks on VCR
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
2
When all other connections are complete, plug in the TV/VCR's power cord.
3
Before you turn on the TV/VCR, go to page eight.
• Before connecting an antenna or cable signal to the ANT(enna) Jack, make sure the pin is not bent. If the pin is
bent, straighten it as illustrated, then connect the antenna or cable signal to the ANT(enna) Jack.
• A rod antenna (not supplied) is available from Philips Service Solutions Group. The part number is 4835 303
37006. To order, call 1-800-851-8885. (This antenna will fit the CCC130 and CCC132 only.)
• Audio and video cables are not supplied.
Crooked Pin
Cable
Connect an Audio cable to the AUDIO
OUT Jack on the VCR and to the AUDIO In
Jack on the front of the TV/VCR.
3CH
IN
4CH
AUDIO VIDEO
ANT.
OUT
OUT
IN
Connect a Video cable to the VIDEO OUT Jack on the
VCR and to the VIDEO In Jack on the front of the TV/VCR.
Helpful Hints
Bent pin
Plug
Hooking Up the TV/VCR (cont'd) 7
AUDIO VIDEO
Straight Pin
CCC130
AUDIO VIDEO STOP REW PLAY F.FWD REC CHANNEL VOLUME POWER
OTR
EJECT
EARPHONE
AUDIO/VIDEO In Jacks
on front of TV/VCR