Real-Time Counter Memory - Philips CCC134 Owner's Manual

42 Real-Time Counter Memory

Follow the steps below to reset the real-time counter to zero at a
tape location you want to refer to later.
1
Press the COMBI button. Then, play, fast forward, or
rewind a tape to the location that you would like to refer
to later. Stop the tape.
2
Press the STATUS/EXIT button. The real-time counter will
appear on the screen.
01:08 PM STOP
CH10
SLP 1 : 23 : 45
3
While the counter remains on the screen, press the
CLEAR button to reset the real-time counter to zero.
0 : 00 : 00
4
While the counter remains on the screen, press the MEM-
ORY button so that M appears on the screen. To erase a
real-time counter memory, press the MEMORY button so that the
M disappears from the screen.
M 0 : 00 : 00
5
To go to the tape location where you set the real-time
counter to zero, press the REW(ind)/s button or the
F.FWD/B button when playback is stopped. When the
tape reaches the point at which you set the counter to
zero, the tape will stop. Press the PLAY/o button to
watch the tape.
2
EJECT
POWER
STATUS
MENU CLEAR FM
/EXIT
1 2 3
4 5 6
7 8 9
SLEEP/
WAKE UP ALT.CH
0
REC PAUSE
/OTR /STILL
PLAY
REW F.FWD
STOP
1
CH. VOL.
MUTE
CABLE SMART
COMBI PICTURE
/DBS
VCR PLUS+
SPEED MEMORY
4
F.ADV SLOW
ENTER
TRACKING VAR.SLOW
INDEX SKIP
SEARCH
1,5
Helpful Hints
• The real-time counter memory will
not function during Repeat Play
mode. Details are on page 43.
• You may only set one real-time
counter memory at a time. If you set
the real-time counter to zero at a
second location, the previous real-
time counter to zero setting will be
lost.
3