Using The P-Touch Update Software (For Windows Only); Updating P-Touch Editor Or The Firmware - Brother TP-M5000N User Manual

Chapter 2
Using the P-touch
Update Software
(For Windows
By using the P-touch Update Software,
P-touch Editor and the machine firmware can
be updated to the newest versions.
Do not turn off the machine while
transferring data or updating the
firmware.
If any other application is running, exit
that application.
NOTE
• The P-touch Update Software must be
used on a computer connected to the
Internet.
• Your software may differ from the contents
of this manual.
• When the P-touch Update Software is
installed, an icon will appear on the
desktop for your convenience.
Updating P-touch Editor or
the Firmware
a
Connect the machine to the computer
with a USB cable, and then turn on the
machine.
b
The P-touch Update Software starts.
 Windows Vista
Double-click the [P-touch Update
Software] icon.
NOTE
You can also start the P-touch Update
Software using the following method.
Click , [All Programs] - [Brother
P-touch] - [P-touch Update Software].
34
®
only)
2
2
® ®
/Windows 7:
®
 Windows 8/Windows
Click [P-touch Update Software] on
the [Apps] screen, or double-click
[P-touch Update Software] on the
desktop.
c
Select the update function to be
performed.
 To update P-touch Editor:
Click the [Computer software
update] icon, and then go to step d.
 To update the firmware:
Click the [Machine update] icon,
and then go to step e.
®
8.1: