Panasonic KX-TVM50 Getting Started page 28

2.16 Wall Mounting
Mounting on Concrete or Mortar Wall
CAUTION
When driving the mounting screws into the wall, be careful to avoid touching any metalwork
(metal/wire laths, etc.), conduits, or electrical cables buried in the wall.
1.
Place the AC adaptor wall mounting template (found later in this section) on the wall to mark the
locations where the 2 screws need to be placed.
2.
Install 2 anchor plugs (user-supplied) in the wall, then install the screws (included) in the wall.
Hammer
3.
Mount the AC adaptor as shown.
28 Getting Started
Anchor Plug
6.4 mm
29 mm
Drive the screw
to this position.