Adjustments; Protection Mode Explanation - Samsung HT-P10 Service Manual
Dvd receiver amp
Hide thumbs
Also See for HT-P10:
- Instruction manual (62 pages) ,
- Instruction manual (31 pages) ,
- Instruction manual (62 pages)
Table of Contents
Advertisement
- Quick Links:
- Specifications
- Amp
- Main
- Amp
- Smps
- Circuit Board Description
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the HT-P10 and is the answer not in the manual?
Questions and answers
Volume is 100 but no sound
There could be several reasons why no sound is coming from the Samsung HT-P10 even when the volume is set to 100:
1. Speaker Connection and Setup – Ensure the speakers are properly connected and the speaker setup is correctly customized.
2. Speaker Mode Configuration – If the center (C), surround left (SL), and surround right (SR) speakers are set to "NONE" in the speaker mode under audio setup, no sound will come from these speakers. Set them to "SMALL."
3. Disc Compatibility – Verify that the DVD being played is 5.1-channel compatible. Some media may not output sound to all speakers.
4. Playback Mode – No sound is heard during fast playback, slow playback, or step motion playback.
5. Damaged Disc – A severely damaged disc may cause sound issues.
6. Condensation – If the DVD player was recently moved from a cold to a warm place, condensation might have formed inside. Let the player stand for 1-2 hours with the power on before use.
Check these points to resolve the issue.
This answer is automatically generated