Samsung digimax 35 User Manual page 31

2. PC Camera
Set Power switch to "OFF".
Connect the camera with USB cable.
Run ⓔ-maxManager, select image mode
and then run video capture.
Camera scanned image is transferred to
※ ※ N N O O T T E E
1. If the environment changed,
automatically measure AE and AWB.
2. First install WDM driver.
3. Separate power is not required to use
USB cable.
Downloaded From camera-usermanual.com
(USB IC2)
PC via USB cable.
Ⅵ Ⅵ
3. MP3 Upload & Play
Set Power switch to "ON".
Connect the camera with USB cable.
Run ⓔ-maxManager to upload MP3 music.
MP3 will play push the "ENTER"key.
CPU IC 1001 Operation by IC7 of MP3
Decoder(IC7, PIC 31 : Date,32 : Clock)
Read data from CF Card and transfer
MP3 Decoder data to D/A converter (IC8)
※ IC 8 Pin 1 : left/right channel clock
Pin 2 : Serial Data, Pin 3 : Serial
clock
Transfer Audio date to AMP IC9, and it
will be output at headphone.
※ ※ N N O O T T E E
IC 7 MP3 Decoder : As single Chip, Layer
3 decoder of MPEG 2 . Also, MPEG 1,2
Audio format is the spec. of ISO, but
MPEG 2,5 is not.
33
. TROUBLESHOOTING