Lan Settings - Panasonic KX-TVM50 Getting Started

4.4 LAN Settings

4.4 LAN Settings
To program the VPS over a LAN connection or to use E-mail Integration features, the VPS must first be
connected to the LAN and programmed accordingly.
Programming the VPS for LAN access
1.
Connect the PC to the VPS via USB (refer to 2.9 Connecting the VPS to a PC or LAN).
2.
Start KX-TVM Maintenance Console and connect to the VPS via USB (refer to 4.2 Starting KX-TVM
Maintenance Console).
3.
Click Utility in the menu bar.
4.
Select LAN Settings.
5.
Select "Obtain an IP address automatically", or select "Use the following IP address:" and specify the IP
address, subnet mask, and default gateway.
6.
Select "Obtain DNS server address automatically", or select "Use the following DNS server addresses:"
and specify the preferred and alternate DNS server addresses.
7.
To change the port number used for accessing the VPS over the LAN, click Advanced Settings, specify
the port number, then click OK, otherwise click OK to close the LAN Settings dialogue box.
Note
•
The port number setting is used for both LAN and modem connections to the VPS.
•
Consult the LAN administrator for the appropriate settings.
•
The VPS must be restarted after these settings are changed in order for them to take effect.
Accessing the VPS over the LAN
1.
Start KX-TVM Maintenance Console.
2.
From the Connect menu, select LAN (TCP/IP).
3.
Enter the IP address, port number, and password used to connect to the VPS.
4.
Click Next, then click Finish when the connection is completed.
48 Getting Started Document Version 2.1 2008/04