Editing Characters; Printing Labels; Deleting Text; Attaching Labels - Epson LW-K400 User Manual

LW-K400
User's Guide

6. Printing labels

1. Press .
The length of the label to print and the number of prints appear,
and printing starts.
2. When the tape stops, press the "Cut Button" to cut the tape.
c
Do not press the "Cut Button" before printing is complete.
Printing multiple copies (end cut)
1. Press .
2. Highlight "Copies" using the cursor keys, then press
3. Enter the number of copies using the cursor keys or numeric keys.
4. Press to start printing.
5. When printing stops, press
printed between each copy.
Using scissors, cut along the marks to separate each label.
Printing multiple copies (each cut)
1. Press .
2. Highlight "Set cut mode" using the cursor keys, then press
3. Select "Each label" using the cursor keys, then press
4. Highlight "Copies" using the cursor keys, then press
5. Enter the number of copies using the cursor keys or numeric keys,
then press .
6. When you are prompted to cut the tape, press the
After each cut using the
starts.
Adjusting print density
1. When the power is off, press
2. Adjust print density with
MEMO
In general, please set the value to the default; "0".

7. Attaching labels

1. Peel off the backing paper.
2. Attach the label and rub it firmly.
Turn the power off after use
J
1. Press .
Batteries:
Take them out if not in use for a long time.
AC adapter:
Disconnect from the outlet and the product.
.
to cut the tape. A cut mark will be
U
.
.
button.
U
button, printing of the next copy
U
+ .
, and press .

Editing characters

Press character keys and enter text.
sPart Names and Functions
Text is entered from the cursor position. sDisplay
To keep the already entered text, first move the cursor to a
c
number to which no text is entered yet with
then enter text.
Switching upper case or lower case
J
1. Press + .
The setting is indicated on the display. Characters are set to upper
case or lower case.
To capitalise partially: Enter with
Deleting characters
J
1. Press .
Deletes one character backward.
Breaking lines
J
1. Press .
Breaks the line from the character next to the cursor.

Deleting text

J
1. Press +
.
2. When a confirmation message appears, press
Text will be deleted.
Confirming text
J
1. Press .
Text appears on the display.
You can check the text and the length of the label.
But the print image cannot be confirmed.
Adding characters with an accent mark to the label
J
If there is a choice of characters with an accent mark, they are indicated
on the display.
Example: École
1. Press +
2. Press .
A choice of characters with an accent mark appears.
3. Select an item with
Go on and enter the next character.
Characters with an accent mark sSymbol List
Adding a punctuation mark to the label
J
Select from the following two methods.
1. Press .
Each press shows the next mark.
Available marks
1. Press +
Each press shows the next mark.
Available marks
Adding a symbol to the label
J
1. Press .
2. When the category appears, select an item with
.
3. When symbols appear, select a symbol with
, and press
Available symbols sSymbol List
pressed.
.
.
, and press .
.
.
+ or + ,
.
, and press
4