Sony DVS-9000 System User Manual page 1010

9
10
Making detailed settings for an Extended VTR
1
2
3
4
1010
Serial Port Settings (Serial Port Assign Menu)
When setting the video port number
Knob Parameter
2 Setting
a) 0: No assignment
When setting the response speed
Knob Parameter
2 Setting
Press [Set].
This confirms the setting.
If required, repeat steps 4 to 9, to set other items.
In the DCU >Serial Port Assign menu, select the setting target (DCU1 or
DCU2) from the <DCU Select> group.
Using any of the following methods, select the serial port connected to the
Extended VTR for which you want to make the settings.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Knob Parameter Adjustment
1 Port No Serial port number
a) The range of setting values depends on the DCU port setting. (When the MKS-2700 is
connected, select 2 for the slot and a value in the range 1 to 6 for the port.)
Press [Port Setting].
The DCU >Serial Port Assign >Extended VTR Setting menu appears.
At the top of the status area, the relevant serial port, slot number, protocol,
serial port name, and SCU number appear. In the lower part of the status
area, the response speed settings appear.
Using any of the following methods, specify the command to which the
response speed setting applies.
• Press directly on the list in the status area.
• Press the arrow keys to scroll the reverse video cursor.
• Turn the knob.
Adjustment Setting values
Video port number 0 to 127
Adjustment Setting values
Response speed 0 to 255
Setting values
1 and upwards
a)
a)