Kenwood KDC-BT610U Instruction Manual page 16

BLUETOOTH®
Other settings
1 Press the volume knob to enter [FUNCTION].
2 Turn the volume knob to select an item (see the following table), then
press the knob.
3 Repeat step 2 until the desired item is selected/activated or follow the
instructions stated on the selected item.
4 Press and hold to exit.
To return to the previous setting item, press
BT MODE
PHONE SELECT Selects the phone or audio device to connect or disconnect.
" * " appears in front of the device name when connected.
" " appears in front of the current playback audio device.
AUDIO SELECT
• You can only connect a maximum of two Bluetooth phones and one Bluetooth
audio device at any time.
1 Turn the volume knob to select a device to delete, then press the knob.
DEVICE DELETE
2 Turn the volume knob to select [YES] or [NO], then press the knob.
PIN CODE EDIT Changes the PIN code (up to 6 digits).
(0000) 1 Turn the volume knob to select a number.
2 Press S / T to move the entry position.
1
Repeat steps
3 Press the volume knob to confirm.
RECONNECT ON: The unit automatically reconnect when the last connected Bluetooth device is
within range. ; OFF: Cancels.
AUTO PAIRING ON: The unit automatically pair supported Bluetooth device (iPhone/iPod touch/
Android device) when it is connected through USB input terminal. Depending
on the operating system of the connected device, this function may not work. ;
OFF: Cancels.
INITIALIZE YES: Initializes all the Bluetooth settings (including stored pairing, phonebook,
and etc.). ; NO: Cancels.
16
ENGLISH
.
2
and until you finish entering the PIN code.
Bluetooth test mode
You can check the connectivity of the supported profile between
the Bluetooth device and the unit.
• Make sure there is no Bluetooth device paired.
1
Press and hold
"PLEASE PAIR YOUR PHONE PIN 0000" appears.
2
Search and select this unit model name (KDC-BT6**U/
KDC-BT5**U) on the Bluetooth device.
3
Operate the Bluetooth device to confirm pairing.
Default: XX "TESTING" flashes on the display.
The connectivity result (OK or NG) appears after the test.
PAIRING: Pairing status
HF CNT: Hands-Free Profile (HFP) compatibility
AUD CNT: Advanced Audio Distribution Profile (A2DP)
compatibility
PB DL: Phonebook Access profile (PBAP) compatibility
To cancel test mode, press and hold
.
to turn off the unit.