Channel Edit (Add Or Skip Channels) - Philips 27PT9015D User Manual

CHANNEL EDIT (ADD OR SKIP CHANNELS)

C
hannel Edit allows you to add or skip channels from your favorite list.
Follow these steps for Digital Mode
1
Press MENU on the
remote control to
display the onscreen
menu
.
2
Press CURSOR < or
> to scroll through the
onscreen menu until
you see DTV Setup
highlighted.
3
Press CURSOR >
to highlight the Ch.
Install menu features.
4
Press CURSOR < or
> to scroll through
the Ch. Install features
until you see Channel
Edit highlighted.
5
Press CURSOR > to
display the Channel Edit
options.
6
Press CURSOR < or
> to scroll the menu to
highlight the channel you
wish to add or skip.
7
Press CURSOR > or <
to toggle between Added
or Skipped. If Skipped is
selected, the channels will
be skipped when scrolling
channels with the CH+ or
CH- . If Added
is selected, the channels
will not be skipped when
scrolling channels with the
CH+ or CH- .
8
When finished, press
MENU on the remote
control four times to
exit the menu from the
TV screen.
Note : When you are in Digital
Mode you can only add or skip
programs in Digital Channels.
It is important to auto install the TV (Refer page 9) before you try to Edit
the Channels. If auto installation is not done, Channel Edit will show an
error message : Favorite Channel list is empty. You must Auto Install.
Press A/D button on the remote control to toggle between Digital and
Analog Mode.
Digital Mode
Language
Tuner Mode
Auto Install
DTV Setup
DTV Setup
Channel Edit
Ch. Install
Digital Audio Weak Dig Sig
AutoLock
Timer
Closed Caption Fact CH Reset
Emerg Alert
Ch. Install
Channel Edit
Weak Dig Sig
AutoLock
Fact CH Reset
Channel Edit
2 - 1 WCBS - DT
35 - 1 MELCO
MENU
< >
H H
ELPFUL INT
Analog Mode
Language
Tuner Mode
Auto Install
Channel Edit
Install
Language Channel
Tuner Mode Skipped
Auto Program
Channel Edit
Channel Edit
Channel
Skipped
Added
POWER
FORMAT CLOCK SLEEP GUIDE
AV SAP CC INFO
AUTO AUTO
A/D
SOUND PICTURE
A/D
MENU OK toggles between
digital and analog
mode
MUTE
VOL CH
12 12
Follow these steps for Analog Mode
1
Press MENU on the
remote control to
display the onscreen
menu.
2
Press CURSOR < or >
to scroll through the
onscreen menu until you
see Install highlighted.
3
Press CURSOR > to
display the Channel
Edit menu features.
4
Press CURSOR < or
> until the Channel you
wish to Edit is displayed.
5
Press CURSOR > to
highlight Skipped option.
6
Use CURSOR > or < to
toggle between on or off.
7
3 If On is selected, the
off
channels will be skipped
when scrolling
with the CH+ or CH- . If
Off is selected, the channels
will not be skipped when
scrolling channels with the
CH+ or CH- .
8
When finished, press
MENU button on the
remote control three
times to exit the menu
from the TV screen.
Note : When you are in Analog
Mode you can only add or skip
programs in Analog Channels.
channels