Table of Contents
Advertisement
BLUETOOTH
Pairing this system with
a BLUETOOTH device
Pairing is an operation where
BLUETOOTH devices register with each
other beforehand. Once a pairing
operation is performed, it does not
need to be performed again.
If your device is an NFC-compatible
smartphone, the manual pairing
procedure is not necessary. (See "One
Touch BLUETOOTH Connection by NFC"
(page 12).)
1
Place the BLUETOOTH device
within 1 meter (3 feet) from
the system.
2
Select the BLUETOOTH
function.
Press to turn on the system.
Press FUNCTION
repeatedly until the
(BLUETOOTH) indicator on
the unit flashes slowly.
Hints
• When there is no pairing information
on the system (for example, when
you use the BLUETOOTH function
for the first time after purchase), the
(BLUETOOTH) indicator flashes
quickly and the system enters the
pairing mode automatically. In this
case, proceed to step 4.
• If the BLUETOOTH connection is
established, terminate the BLUETOOTH
connection (page 12).
10
GB
3
4
PAIRING
5
Hold down FUNCTION
PAIRING for more than
3 seconds.
The
(BLUETOOTH) indicator
flashes quickly.
Perform the pairing procedure
on the BLUETOOTH device.
For details, refer to the operating
instructions of your BLUETOOTH
device.
Select "GTK-XB5" on the
display of the BLUETOOTH
device.
Note
If passkey is required on the BLUETOOTH
device, enter "0000." "Passkey" may
be called "Passcode," "PIN code," "PIN
number," or "Password."
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the GTK-XB5 and is the answer not in the manual?
Questions and answers
gtk xb5 no sound at all turns on and connects to bluetooth and lights sync to music even tho nothing is coming through speaker thanks sophie
The Sony GTK-XB5 may have no sound due to the following reasons:
1. Setting Errors – Audio settings may not be configured correctly.
2. Cable Connection Issues – If using a wired connection, the cable may be loose or faulty.
3. HDMI Connection Errors – If connected via HDMI, the connection may be unstable or incorrect.
Checking and adjusting these settings or connections should resolve the issue.
This answer is automatically generated