Minimum Distances - L&W Compressors LW 100 E Operating Instructions Manual

I N S T A L L A T I O N

Minimum distances

Note
i
Minimum distances must be adhered!
• Make sure that the compressor always has a sufficient amount of fresh air available.
• To prevent serious damage, ensure that the cooling air flow can flow freely.
• The following minimum distances must be adhered:
Front side min. 300 mm, rear side min. 300 mm. Avoid anything in this area which can restrict
the cooling air flow.
• No minimum distances are required at the side panels.
Fig. Minimum distances LW 100 E / E1
Fig. Minimum distances LW 100 B
LW 100 Series
Version: 29.03.2016
300 mm
300 mm
300 mm
300 mm
Page A - 23
A