Firmware Update - Extron electronics ShareLink 250 W User Manual

Firmware Update

Figure 49.
1 Export System Configuration
Use this section to export or import the system configuration file.
Export System configuration:
Export — Click to export the system configuration to a configuration file.
•
NOTE: This option does not export the custom standby image (if one has been
Import — Click to import the system configuration file to the ShareLink 250 W.
•
2 Firmware Update
Use this section to update the ShareLink 250 W firmware. Follow these instructions to
update the firmware:
1. Download latest firmware file from the Extron website (see
ShareLink 250 W Firmware
2. Click Browse... (
firmware file.
3.
Click Update to start firmware update. A warning message and counter are shown
on the screen. After a few minutes, "Complete" is shown on the screen.
Firmware Update
loaded on the standby screen).
) to browse to the firmware file location, and select the
2
ShareLink 250 W • Using the Embedded Web Pages
Downloading
on page 54).
50