Limitation of Liability Purchaser assumes all risk and liability for loss, damage, or injury to Purchaser, others, and property arising out of the use, misuse, or inability to use ErosTek products (the “Product”). ErosTek and their related companies, members, agents, employees, affiliates, and consultants (collectively the “Manufacturer”) will in no event be liable to Purchaser, or...
Given the nature of electrostimulation, ErosTek cannot be liable for any damage or harm of any kind caused by or related to ErosTek products. Treat the ET312 like a sharp knife or power tool. It must be used properly or injury may result.
ET312. The ET312 is like a fully automatic camera which makes things simple by making most of the adjustments for you. And, like a professional camera, it also offers optional features for the more experienced user.
Never make connections to body jewelry or similarly small electrodes. Do not use electrodes made of toxic metals such as lead solder. If you intend to use the ET312 on someone else, you should experiment with it on yourself before connecting it to someone...
Page 6
Level A Level B The ET312 has six connection jacks along the lower right side of the front panel as shown below. Most of the jacks accept the same style plug so it’s important to use care in making connections.
Page 7
Link Connector - This is a proprietary digital interface that serves multiple purposes. First, it allows the ET312 to be connected to a personal computer running ErosLink™ software (see section A6). The cable and software are available separately. Second, it allows two ET312 units to be connected together in a master slave configuration.
High-Sensitivity Microphone 8: CONTROLS The ET312 offers a wide variety of e-stim options yet is very easy to use. There are multiple e-stim patterns or routines available. These are called “Modes.” You can further tailor each mode to your tastes.
LCD display, see the Troubleshooting section for more information. 9: LCD DISPLAY The ET312 has a lighted LCD for ease of use. When first turned ON, it will display a copyright message and a progressive bar as the various self tests are run. When the tests...
This soft ramp function automatically happens whenever you select a new mode as some modes may feel more intense than others. The number “XX” displayed after ramp shows you the ramp level from 00 to 99%. After the ramp is complete, the ET312 will display something like this:...
Page 12
Modes Rhythm - This mode toggles the outputs on and off at a rate ranging from slow to very fast (set by the MA control). At the same time, the output is grouped into “blocks” that get gradually stronger. Use care with setting the level as this mode slowly grows. Audio Modes —...
Page 13
User 1 through 6 - These are displayed for custom stimulation routines you can add using the optional ErosLink software. If you do not have ErosLink software, these modes will not display. ErosLink is available from ErosTek and most dealers. See Section A5 for more information.
Page 14
ET312 and you will void the warranty by attempting to open it. If you carry your ET312 onto an airplane, be prepared to explain what it is, or refer to it as a piece of “audio test equipment”. If you ship it or place it in checked baggage, be sure to...
Page 15
Advanced Topics – Introduction and Menus A1: ADVANCED INTRODUCTION Consider the ET312 similar to an advanced camera. Most users let their cameras set the exposure, focus automatically, decide when to use the flash, etc. In a similar way, the ET312 normally automates several adjustments. Some users, however, may want more control.
Page 16
Advanced Topics — A2: Menus Set As Favorite? - Pressing OK will select the current mode as your favorite mode. This means next time you turn on your ET-312, it will automatically start in your favorite mode. The default is Waves. Set Pwr Level? - Pressing OK brings up the Power Level menu.
Page 17
From the main menu, press the DOWN key to reach “Adjust Advanced?”, then press “OK” to select from the menus below. These menus are intended for the advanced user looking to further “fine tune” the sensations the ET312 produces. These settings are optimized at the factory and need not be changed for most users.
Page 18
Pace Adjust? - This adjusts the rate or interval of certain modes. A4—TRIPHASE STIMULATION TriPhase is an ErosTek exclusive feature. It creates three stimulation currents using only two channels. It is especially important the Phase and Audio3 modes never be used above the waist.
Page 19
3.5mm plug) has response down to DC. This allows an external DC voltage, from 0 to 2 volts, to be used to proportionally control the output of the ET312 in the Audio 1 and Audio 2 modes. The MA control can be used to set the adjustment range. A simple 1.5 volt battery circuit connected with “+”...
ET312. Check erostek.com for more information on ErosLink and upgrade options. TROUBLESHOOTING Self Test - The ET312 runs a complete check every time you power it on and monitors various conditions while operating. If any problems are found, the ET312 is designed to shut off the outputs and either reset itself or display an error message.
Page 21
No other warranty of any kind, verbal or written, shall bind ErosTek and their related companies, members, agents, employees, affiliates and consultants (collectively the “Manufacture”).
Important! Customers use the ET312 at their own risk understanding the ET312 may be harmful if misused.Please understand that, given the nature of electro-stimulation, ErosTek cannot be liable for any damage or harm of any kind caused by or related to ErosTek products.
Need help?
Do you have a question about the ET312 and is the answer not in the manual?
Questions and answers