Pop-up micro-sprinkler with low water consumption ideal for watering vegetable patches and small gardens, even at low pressure. projection from ground 2” (5 cm) (4 pages)
Page 1
User manual Pag. 1 Aqua-Magic System can be used to water pots and small vegetable patches through the drippers provided, selecting the water quantity and irrigation frequency by choosing from the preset values. By using solar energy through its photovoltaic panel, the Aqua-Magic System powers rechargeable batteries (not supplied).
Page 2
10 0 < 3°C Aqua-Magic System (code): 8063 HOW TO INSTALL. If the water tank is outside, position it in a shaded place. Fix the bracket to the wall using the screws and plugs provi- ded and hang the timer (1). To make the water suction hose, cut a length of feeding tube. Insert the lter in one end of the hose and connect the other end to the timer.
Page 3
HOW TO INSTALL. When setting up your system, we recommend respecting the distances shown between the timer, water tank and hoses, so that the timer can function at its best. Aqua-Magic System (code): 8063 HOW TO INSTALL. After positioning the timer, the hoses, anti-siphon valve, stakes, ttings, drippers and end- of-line plugs can be connected up.
4) “FREQUENCY” selector dial set to manual when manual watering has nished. Aqua-Magic System (code): 8063 PROGRAMMING. The rst watering cycle starts after the timer has been programmed for the rst time. The following watering cycles start according to the frequency set.
Page 5
3 seconds on any other frequency as this will “FREQUENCY” selector dial. be considered a new setting. Aqua-Magic System (code): 8063 SETTING CHANGES. CHANGING START TIME AND/OR FREQUENCY OF WATERING CYCLES. Wait for the new time at which you want watering to begin (for example 22:00).
Need help?
Do you have a question about the Aqua-Magic System and is the answer not in the manual?
Questions and answers