JVC PD-35DX Service Manual page 10

PD-35DX
2.4.7 REMOVING THE PDP POWER PWB (Fig.3)
• Remove the REAR COVER and INSULATOR SHEET.
(1) Remove the 6 screws [K], and remove the PDP POWER
PWB.
NOTE:
• Disconnect the connectors [CN00J], [CN0AU], [CN0AT],
[CN0AV] from the PDP POWER PWB.
• It is advisable to take note of the connecting location
(connector number) of the removed connectors.
2.4.8 REMOVING THE CHASSIS BASE (Fig.3)
• Remove the REAR COVER and INSULATION SHEET.
• Remove the TERMINAL COVER and SPEAKER TERMINAL
PWB.
• Remove the AC INLET COVER.
• Remove the FILTER SHIELD and LINE FILTER PWB.
• Remove the AUDIO PWB.
• Remove the SYSTEM POWER PWB.
• Remove the PDP POWER PWB.
(1) Remove the 4 screws [L] and 5 screws [M], and remove the
CHASSIS BASE.
SYSTEM
POWER
PWB
J
(x4)
M
(x2)
INSULATION
SHEET
L
1-10 (No.52089)
AUDIO PWB
I
PDP POWER PWB
(x4)
K
(x6)
FILTER
SHIELD
H
(x4)
L
L
INSULATION
(x2)
M
SHEET
(x3)
CHASSIS
BASE
Fig.3
2.4.9 REMOVING THE DISPLAY INTERFACE PWB (Fig.4)
• Remove the REAR COVER.
(1) Remove the 1 screw [N], 2 screws [O], 2 screws [P], and
remove the DISPLAY INTERFACE PWB.
NOTE:
• Disconnect the connectors [CN0AH], [CN0CB], [CN0CD],
[CN0CC], [CN0AV], [CN0CF], [CN0CE] from the DISPLAY
INTERFACE PWB.
• It is advisable to take note of the connecting location
(connector number) of the removed connectors.
2.4.10 REMOVING THE INTERFACE PWB BASE (Fig.4)
• Remove the REAR COVER.
• Remove the AC INLET COVER.
• Remove the CHASSIS BASE (with each PWB attached to
CHASSIS BASE).
• Remove the DISPLAY INTERFACE PWB.
(1) Remove the 3 screws [Q] and 3 screws [R], and remove the
INTERFACE PWB BASE.
R
(x3)
Q
S
(x4)
H
(x2)
LINE
FILTER
PWB
FRONT PANEL
2.4.11 REMOVING THE PDP (PANEL) UNIT (Fig.4), (Fig.5)
• Remove the REAR COVER.
• Remove the AC INLET COVER.
• Remove the CHASSIS BASE (with each PWB attached to the
CHASSIS BASE).
NOTE:
• Disconnect the connectors [CN0AU] and [CN0AT] from the
PDP POWER PWB.
• Disconnect the connectors [CN0AH], [CN0CB], [CN0CD],
[CN0CC], [CN0AV], [CN0CF], [CN0CE] from the DISPLAY
INTERFACE PWB.
• It is advisable to take note of the connecting location
(connector number) of the removed connectors.
DISPLAY INTERFACE
PWB
P
(x2)
O
(x2)
Q
INTERFACE PWB
(x2)
BASE
Fig.4
T
(x4)