Removing the I/O board
WARNING: Before working inside your computer, read the safety
information that shipped with your computer and follow the steps in
working inside your
the instructions in
practices, see the Regulatory Compliance home page at
regulatory_compliance.
Prerequisites
1
Remove the battery.
2
Remove the
optical
3
Remove the
base
4
Remove the
hard
5
Remove the
wireless
6
Remove the keyboard.
7
Follow the procedure from step 1 to step 7 in
Procedure
1
Remove the screw that secures the I/O board to the palm-rest assembly.
2
Lift the I/O board and turn it over.
3
Lift the latch and, using the pull-tab disconnect the I/O-board cable from the
I/O board.
computer. After working inside your computer, follow
After working inside your
drive.
cover.
drive.
card.
computer. For more safety best
www.dell.com/
"Removing the computer
Before
base".
55