Table of Contents Safety Precautions ............2 Precautions for Use .............2 Introduction ...............4 The MB-D10 and Accessories ........4 The MB-D10 and Supplied Accessories .....4 The BL-3 Battery-Chamber Cover (Available Separately) ............4 Parts of the MB-D10 ............5 The MB-D10 Shutter-Release Button, Multi Selector, Command Dials, and AF-ON Button ......5...
Li-ion batteries. immediately. After removing the batteries, take • The MB-D10 can be used with the MS-40 AA the device to the retailer or a Nikon-authorized battery holder for the MB-40 multi-power bat- service representative for inspection.
Page 6
How ev er, there is no guar an tee that in ter - Nikon Corporation may void the user’s au thor i ty fer ence will not occur in a par tic u lar in stal la tion. If to operate the equipment.
The MB-D10 and Supplied Accessories multi-power battery pack for use with all Confi rm that the following items are supplied with the MB-D10 (batteries are sold separately). Nikon single-lens refl ex digital cameras that list the MB-D10 as a compatible accessory in the camera manual.
MB-D10. The function performed by the AF-ON button on the MB-D10 !0 Battery chamber can be selected using the [AF-ON for MB-D10] option in Group a. See the camera manual for !1 Mounting screw details.
1 Remove the contact cap (Figure A- ) from the battery pack. move the MB-D10. Be sure to replace the con- 2 The contacts for the MB-D10 are in the base of the camera, where they are protected by a con- tact cover on the camera and the contact cap tact cover.
AA: Place eight AA batteries in the MS-D10 battery holder as shown in Figure H, making sure that the batteries are in the correct orientation. 3 Insert the battery or battery holder in the MB-D10 and latch the battery-chamber cover (Figure I). Make sure the battery or holder is fully inserted before turning the latch.
Page 11
(the camera Battery partially — battery is listed on the left, the MB-D10 on the To ensure that the camera discharged. right). Only the battery level is listed when AA shows the correct battery batteries are used.
Removing Batteries Be careful not to drop batteries, the holder, or the optional battery-chamber cover. 1 Turn the MB-D10 battery-chamber latch to and remove the battery holder (Figure E). 2 Remove the battery or batteries from the holder or optional battery-chamber cover.
Use is not recommended at low temperatures. In gen- eral, AA batteries have less capacity than other power sources when used in the MB-D10; EN-EL3e, EN-EL4a, and EN-EL4 batteries are recommended for best performance.
Need help?
Do you have a question about the MB-D10 and is the answer not in the manual?
Questions and answers