Advertisement
Advertisement
Table of Contents
Summary of Contents for Rem-Fit zeeq
- Page 1 USER MANUAL...
- Page 2 Additional Help & Info If you need additional help or information, please go to REM-Fit.com for tips, info, support & tutorials. Register your product at REM-Fit.com/register ZEEQ is a registered trademark of JAB Distributors LLC DBA REM-Fit...
-
Page 3: Table Of Contents
ZEEQ Remote _____________________ 3 ZEEQ Functions _____________________ 4-5 ZEEQ Lights _____________________ 6-7 ZEEQ Music _____________________ 8 “5-Click” Sleep _____________________ 9 ZEEQ Auto Sleep _____________________ 10 FAQ’s _____________________ 11 Specifications _____________________ 12 Care & Maintenance _____________________ 13 Health & Safety _____________________ 14... -
Page 4: Welcome Page
This guide will explain the functions of your new ZEEQ. A complete tutorial can be found in the ZEEQ app. Get the ZEEQ app at REM-Fit.com/apps The ZEEQ app will walk you through setup of your new ZEEQ. Please continue setup in the ZEEQ app. -
Page 5: Zeeq Remote
ZEEQ Remote Micro-USB Charging Port Power Button LED Lights Reset Lights Volume Up (Press 2x Skip Track) Volume Down (Press 2x Previous Track) -
Page 6: Zeeq Functions
ZEEQ Functions Power Press and hold for 5 seconds to cycle on/off LED will be green in “Wake” mode LED will be blue in “Sleep” mode. *LED will dim after 5 seconds... - Page 7 ZEEQ Functions • Click 1x for “volume up” • Click 2x for “skip track” • Click 1x for “volume down” • Click 2x for “previous track” • Use a pin to press the button and reboot ZEEQ RESET...
-
Page 8: Zeeq Lights
ZEEQ Lights Battery Status: • ZEEQ will blink white when powered on to indicate it’s battery status 0% - 25% 25% - 50% 50% - 75% 75% - 100% Access Denied: • ZEEQ will blink red and white repeatedly if you attempt to enter sleep mode while charging •... -
Page 9: Low Battery
• ZEEQ will blink red while charging. • ZEEQ will be solid white when fully charged. Low Battery: When ZEEQ is low on power, it will blink red three times every few minutes. Please charge ZEEQ when you see this. -
Page 10: Zeeq Music
*The ZEEQ app will automatically turn the speakers on/off in sleep mode. Speaker Status: To see if the ZEEQ speakers are on, you can press and hold the buttons at the same time for 2 seconds. If the speakers are on, LED 2 will blink blue for a moment. -
Page 11: 5-Click" Sleep
ZEEQ app. 1. Enable “5-Click” in the ZEEQ app. 2. Set your default alarm and setting in the ZEEQ app. 3. Save your settings. *This must be done near your ZEEQ To start and stop sleep from your remote simply press the button on the remote 5 times. -
Page 12: Zeeq Auto Sleep
1. Enable “Auto Sleep” in the ZEEQ app. 2. Set a “Start Time”. This is the time ZEEQ will begin Auto Sleep detection. 3. Set the Auto Sleep duration window. This is how long after the “Start Time”... -
Page 13: Faq's
ZEEQ. Can I use ZEEQ as a speaker without going to sleep? • Yes, you can use the ZEEQ app to turn the ZEEQ speakers on, set a timer and select music to listen to. •... -
Page 14: Specifications
Music and Data Transmission Wireless Range: 10m (30 feet) App Requirements: Requires iOS 8.2 or above Android 4.3 ‘Jelly Bean’ or above Requires BLE support Designed in Wheeling, IL - Made in China by JAB Distributors LLC REM-Fit | 12... -
Page 15: Care & Maintenance
• Please ensure that ZEEQ is not close to any source of excessive vibration or noise to ensure that the sensors can accurately detect and monitor the users’ sleep. Vibrations and noise caused by electric fans, washing machines or loud music etc. -
Page 16: Health & Safety
Do not use or sleep on ZEEQ while charging. • Do not leave ZEEQ unattended while charging. • The ZEEQ battery is not user serviceable. Do not attempt to access it. • If ZEEQ is damaged, discontinue use immediately. •... -
Page 17: Testing Information
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. - Page 18 Product Description: Smart Pillow REM-Fit and ZEEQ are trademarks of REM-Fit. Apple, the Apple logo, iPad and iPhone are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc.
- Page 19 JAB Distributors LLC DBA REM-Fit | www.rem-fit.com...
Need help?
Do you have a question about the zeeq and is the answer not in the manual?
Questions and answers