Laser Pegs NFL003 The Pledge Assembly Instruction

Please read manual before you begin! Failure to
LIMITED
follow this manual's instructions may result in
damage to the Triangle Power base, AC adapter
EDITION
and/or Laser Pegs®. Not adhering to these
For Boys And Girls
directions will void the manufacturer's warranty.
Packing has to be kept since it contains
Ages 5 And Up
24 Models+ important information.
WARNING:
Any creation you can build
CHOKING HAZARD
-
Small parts.
Not for children under 3 yrs.
LIGHTED
Do not submerge in water.
CONSTRUCTION SET INCLUDES:
• 32 Laser Pegs®
• 96 Construction Parts
• Triangle Power Base
• Instruction Manual
Requires 3 AA Batteries
Construction Compatible
Compatible with other construction kits
Batteries NOT
EN71, RoHS COMPLIANT
Included
This product complies to
all safety requirements
MODEL INSTRUCTIONS
All additional model instructions can
x2 AV
be downloaded at www.LaserPegs.com
Laser Peg® Parts List
x2
x6
There is No LED In The 90 Degree Peg
x1
x4
x2
Y PEG
STRAIGHT
x2
45° PEG
x4 T-PEG
TRIDENT PEG
x4
SQUARE SQUARE
PEG
M-M PEG
x4
WHEEL PEG
STACKABLE
90° PEG
Color Each Laser Peg® is color coded on the circuit board inside
each shape. There is No LED In The 90 Degree Peg.
Code
Laser Pegs ® Stackable
Laser Pegs ® link that
Triangle Power
allows you to connect to
Base
other construction kits.
Construction Parts List
x2
x2
x2
x8 x2
x2
x8
x2
x2
x4
x4
x2
x2 x2
x8
x2 x2
x2
x2
x2
x4
x2
x2
x2
x2
x2 x1
x1
Connecting Pegs
To construct with Laser Pegs®, slide two pieces together to form a
connection. Slide each piece on and off smoothly. To build away from the
Triangle Power Base, use the peg cord in one of the top three peg holes to
illuminate your model! The 90° pegs are essential to construction but they
DO NOT ILLUMINATE.
Press button
Power Button
to turn on/off
Push button to cycle
through 3 different
light settings.
AC Adapter
Connection
When Using Batteries
1. Remove screws.
2. Place three AA batteries in the correct
of ASTM F 963
position - as displayed inside the Triangle
Power Base.
3. Push RED button to turn on!
4. Do not mix old and new batteries.
5. Do not mix alkaline, standard (carbon-
zinc), or rechargeable (nickel-cadmium)
batteries!
6. Exhausted batteries are to be removed
from the power base.
7. Never connect more than 200 Laser Pegs®
8. Non-rechargeable batteries are not to be
recharged.
9. Rechargeable batteries are only to be
charged under adult supervision.
10. Rechargeable batteries are to be removed
from the toy before being charged.
11. Batteries are to be inserted with the
correct polarity.
x2
HELMET PEG
12. The supply terminals are not to be short-
circuited.
Using an
AC Adapt
er
x1
FOOTBALL PEG
Remove all batteries
from Laser Pegs® power
base before using the
5 volt AC adapter.
*To avoid short-circuits, keep metal objects and
other un-authorized materials from obstructing
the peg holes.
The AC adapter and the power base are to be regularly examined for damage
to the cord, plug, enclosure and other parts, and in the event of such damage,
they must not be used until the damage has been repaired.
WARNING! Each Laser Peg® draws current from the batteries. Therefore, the more
pegs you use, the quicker you will deplete your battery power! As the power
weakens, the current will slowly fail and some Laser Pegs® will illuminate (typically
the reds and yellows) and some won't. When the Laser Pegs® dim the Laser Pegs®
x4
are not broken, they just need stronger batteries or an AC Adapter.
You have 3 simple options...
1. Use a 5 volt AC Adapter –available from www.LaserPegs.com
x4
2. Change the batteries.
3. Use high quality batteries. They will last a little longer, but they will still deplete
rapidly the more laser pegs you connect!
x4
www.LaserPegs.com
x4
This manual is copyright and cannot be reproduced or used online without Laser
Pegs®Ventures LLC permission. Copyright 2013 © All Rights Reserved US Patent
#7,731,558 Additional Global & Multiple Patents Pending. Laser Pegs®Ventures
LLC. 8304 Consumer Ct Sarasota FL. 34240. Contact: Support@LaserPegs.com
x2
NFL Series Helmet and Football Peg
The NFL Series Laser Pegs® kit includes the Football and Helmet Peg.
These shapes can be used with any other existing Laser Pegs® kit. Both the
Football and Helmet Pegs illuminate.
HELMET PEG
The NFL Series
Laser Pegs® kit
Football Peg has only
Peg Holes
one mating end.
Affixing NFL Team Logo Stickers
Your NFL Series Laser Pegs® kit comes with a set of licensed NFL team
decal stickers. There are two stickers per team included. These stickers can
be affixed to the sides of the Helmet Peg or the the Football Peg.
Remove the three Philips head
screws with a 4mm screw driver.
Requires (3AA) Batteries
When using an AC
Adapter, NEVER
place the adapter
plug into the Tri-
angle power base
top peg holes.
Never connect more than 200
Laser Pegs® when using a 5 volt
(2000mA) AC Adapter.
There will be two (2) sheets of NFL logo stickers included inside each
individual NFL Series Laser Peg® kit. These sheets of stickers will have a
set of two (2) team logos that can be placed on either side of the Helmet
or Football Peg. Before applying stickers to the pegs, it is advisable to first
wipe any dirt, oil or residue that maybe on the surface of the pegs due to
handling with a clean dry cloth. This will help ensure proper adhesion to
the peg's surface.
When applying the NFL Series
Laser Peg® Team Logo Stickers
The NFL Series
Laser Pegs® kit
Supplied NFL team stickers will be reflected so that they will remain in
Helmet Peg(s) Is
the correct orientation when they are applied to either side of the Helmet
included.
or Football Pegs.
FOOTBALL PEG
Apply Sticker to side
of Football Peg.
Additional stickers are included
Your NFL Series Laser Pegs® kit also includes bonus material from the
NFL Rush Zone.
WARNING! Do not ingest stickers or backing sheet. This could be potentially
dangerous and may cause severe injury. So keep away from small children.
Apply Sticker to
side of Helmet Peg.