Yamaha YAS-706 Series Owner's Manual page 37

Connecting a mobile device to the unit
directly (Wireless Direct)
Connect a mobile device directly to the unit without using a wireless
router (access point).
Wireless Direct supports the following.
− Operation of the unit using a mobile device to which the dedicated
MusicCast CONTROLLER app has been installed.
− Use of AirPlay to play music files stored on an iOS device.
/ / /
ENTER
Mobile device
SETUP
NOTE
• You cannot use Wireless Direct simultaneously with the wired network connection
(p. 26) or the wireless network connection (p. 27).
• When Wireless Direct is enabled, the mobile device and the unit cannot connect
to the Internet. Therefore, you cannot use any kind of Internet service such as
Internet radio.
1
z
Press the key to turn on this unit.
2
Turn on the TV and switch the TV input to display
video from the unit (HDMI OUT jack; p. 16).
3
Press the SETUP key.
The setup menu is displayed on the TV screen.
4
Use the / keys to select "Network", and then
press the ENTER key.
5
Use the / keys to select "Network Connection",
and then press the ENTER key.
6
Use the / keys to select "Wireless Direct", and
then press the ENTER key.
7
Use the / keys to select "Security" and the
keys to select the encryption method.
Settings
None, WPA2-PSK (AES)
In most cases, "WPA2-PSK (AES)" should be selected. If your
mobile device does not support "WPA2-PSK (AES)", select
"None".
NOTE
• As communications are not encrypted when "None" is selected, selecting
this option poses the risk that third parties may access the unit without your
permission.
8
Use the / keys to select "Security Key" and
press the ENTER key.
HINT
• If you select "None" in step 7, this item is not available.
NETWORKS ➤ Connecting to a network
/
37
En