Philips MAGNAVOX MAT960 Owner's Manual page 13

Connecting to a TV with an S-VIDEO jack
This connection will provide the best picture quality.
1
Connect the AUDIO R(ight) and L(eft) jacks on the
Internet Terminal to your TV's AUDIO IN jacks, using
the supplied audio cables.
Do not connect the VIDEO cable (yellow) to the
VIDEO OUT jack.
2
Use an S-VIDEO cable (not supplied) to connect the S-
VIDEO OUT jack on your Internet Terminal to the S-
VIDEO IN jack on your TV. (An S-VIDEO cable is
available from Philips Service Solutions Group or your
local dealer. See page 40 for details.)
3
Connect one end of the telephone cable to the
Internet Terminal's TEL LINE jack. Connect the other
end to your home's telephone outlet.
4
Connect one end of the AC power cord to the
Internet Terminal's AC INPUT jack. Connect the other
end to an AC outlet.
Check that your local AC voltage corresponds
to the voltage indicated on the AC adapter
(120V) before connecting the unit to AC power.
If it does not, consult your dealer.
NOTES
If you choose the S-VIDEO setup, use the
remote control that came with your TV to set the video input,
when viewing WebTV, to S-VIDEO IN.
Connections (cont'd)
Back of Internet Unit
S-Video Cable
Audio Cables
(not supplied)
Phone
Cable
TV
VIDEO
IN
75V
ANT /
CABLE
L L
A
S - VIDEO
U
OUT
D IN
I
O
R
R
13
AC
Power
Cord