Related Manuals for Philips SE6590
Summary of Contents for Philips SE6590
- Page 1 Register your product and get support at www.philips.com/welcome US-EN Telephone Answering Machine Warning Use only rechargeable batteries. Charge the handset for 24 hours before use. SE6590...
-
Page 3: Table Of Contents
Table of contents Safety Information Equipment Approval Information 1.1.1 Notification to the Local Telephone Company 1.1.2 Rights of the Phone Company Interference Information Hearing Aid Compatibility (HAC) FCC RF Radiation Exposure Statement Important Power requirements Electric, Magnetic and Electromagnetic Fields (“EMF”) Recycle your batteries ®... -
Page 4: Table Of Contents
Change the Display Language Select the Display Wallpaper Select the Color Theme Set the Display Contrast Set the Backlight Time Deactivate/Activate Auto Hang-Up Advanced settings 10.1 Registration 10.2 Unregister Technical data INDEX Table of contents... -
Page 5: Equipment Approval
1 Safety Information Equipment Approval Information Your telephone equipment is approved for connection to the public switched telephone network and is in compliance with parts 15 and 68, FCC Rules and Regulations and the Technical Requirements for Telephone Terminal Equipment published by the ACTA. 1.1.1 Notification to the Local Telephone Company On the bottom of this equipment is a... -
Page 6: Rights Of The Phone Company
1.1.2 Rights of the Phone Company Should your equipment cause trouble on your line, which may harm the telephone network, the telephone company shall, where practicable, notify you that temporary discontinuance of service may be required. Where prior notice is not practicable and the circumstances warrant such action, the telephone company may temporarily discontinue... -
Page 7: Hearing Aid Compatibility
• Connect the telecommunications equipment to an outlet on a circuit different from that to which the receiving antenna is connected. If these measures do not eliminate the interference, please consult your dealer or an experienced radio / television technician for additional suggestions. Also, the Federal Communications Commission has prepared a helpful booklet, “How To Identify and Resolve... -
Page 8: Power Requirements
• Do not allow the charger to come into contact with liquids. • Never use any other battery than the one delivered with the product or recommended by Philips: risk of explosion. • Always use the cables provided with the product. -
Page 9: Electric, Magnetic And Electromagnetic Fields
Philips plays an active role in the development of international EMF and safety standards, enabling Philips to anticipate further developments in standardization for early integration into its products. -
Page 10: Service Centers
® RBRC is a registered trademark of Rechargeable Battery Recycling Corporation. Service Centers US service center Philips Accessories & Computer Peripherals North America1881 Route 46 West Edgewood, NJ 07852 Phone: (800) 233-8413 E-mail support: http://www.support.philips.com/support ® The RBRC seal... - Page 11 ® The RBRC seal...
-
Page 12: Your Phone
This manual only explains part of the functions of your handset. For details on other functions, refer to the manual provided with the base station. To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. What’s in the box... -
Page 13: Overview Of Your Handset
Overview of your handset Event LED The event LED on your handset blinks when there is a new message recorded on your telephone answering machine. If you have subscribed to Caller Line Identification, the event LED also blinks when there is a new call, or a new voice mail message. - Page 14 station, this key works with the default line when making or answering external calls. During a call: Activate the flash function. In other modes: Dial the selected number in the Phonebook, Redial list, or Call log. When used with the dual-line SE659 base station, works with the default line.
- Page 15 When used with the SE650/655 base station during call log display: Toggles area code and long distance display on/ off. Mute key When off hook: Deactivate/activate the microphone. Call transfer key & Intercom In idle mode: Initiate an internal call. During a call: Short press to hold the line and page another handset.
-
Page 16: Display Icons And Messages
Display icons and Messages SE650/655/658 All base station models: Indicates that the battery is fully charged. This icon blinks during charge and when the battery is low. When the Icon is empty the battery is practically discharged. Note If Warning Batt flashes together with a blinking battery icon, batteries of the wrong type are installed in the handset. -
Page 17: Connect The Charger
Back/ Back appears when in menu Clear mode. Press the key directly below to return to the previous menu level. Clear appears when making an entry. Press the key directly below to clear (delete) a character or number when making an entry. Long press to clear all. -
Page 18: Install The Batteries
way to power down the charger is to unplug the power adaptor from the power outlet. Therefore, ensure that the power outlet is easily accessible. The power adaptor must be connected correctly, as incorrect connection could damage the unit. Install the batteries Warning Always use the AAA rechargeable batteries supplied with your handset. -
Page 19: Install Optional Headset
To remove the belt clip, simply pull the clip away from the handset. To attach the belt clip to your handset, fit the tabs on the belt clip into the slots at the back of the handset and push into place. Install optional headset Your handset may be used with an optional headset (not included in the... -
Page 20: Checking The Signal Strength
On the handset, press to Advanced Set and press Select. Scroll to Register and press Select. Enter the PIN when prompted and press OK to confirm. Registering… is displayed on the screen. • Upon successful registration, a validation tone is emitted and the handset number (1 to 8) is assigned by the base station automatically. -
Page 21: Using The Intercom And Conference Calling
Using the Intercom and Conference Calling Using the Intercom The intercom feature allows you to make free internal calls, transfer external calls from one handset to another and use the conference option. With the SE658/ SE659, you can also make internal calls or conference between the handset and the base station. -
Page 22: Answer An External Call During Intercom
8.1.3 Answer an external call during intercom During intercom, a new call tone is emitted when there is an incoming external call. Press to exit intercom mode. When using the handset with the SE650/655/658 base station, press to pick up the external call. When using the handset with SE659 base station, press Line 2 to pick up the external... -
Page 23: Personal Settings
Personal settings Change the Handset Name You can name the handset and display the handset name in idle mode. The default handset name is Philips. Press in idle mode, scroll Personal Set and press Select. Handset Name is highlighted. Press Select. -
Page 24: Activate/Deactivate Key Beep
When using the handset with the SE650/655/658 base station, scroll to your desired melody. When using the handset with the SE659 base station, first scroll select Line 1 or Line 2 and press Select. Then scroll desired melody. • The melodies will play as you scroll them. -
Page 25: Set The Display Contrast
Press in idle mode, scroll Personal Set, and press Select. Scroll to Color Theme and press Select. Scroll to your desired color theme. The color theme used on the display will change as you scroll. Press Select to confirm. • A validation tone is emitted and the screen returns to the Personal Set menu. -
Page 26: Advanced Settings
10 Advanced settings 10.1 Registration Please refer to section 6.1 on how to register the handset. 10.2 Unregister Press in idle mode, scroll Advanced Set and press Select. Scroll to Unregister and press Select. Enter the PIN when prompted and press OK to confirm. -
Page 27: Index
12 INDEX Activate/Deactivate Key Beep 22 Advanced settings 24 Answer a call 18 Answer an external call during intercom 20 Change the Display Language 22 Change the Handset Name 21 Charge the batteries 16 Checking the signal strength 18 Conference calling 20 Conferencing between two internal units and an external line 20 Connect the charger 15... - Page 28 Unregister 24 Using the Handset 18 Using the Intercom 19 What’s in the box 10 Your phone 10 UCZZ01111ZZ(0) INDEX...
- Page 29 ©2008 Koninklijke Philips Electronics N.V. All rights reserved Reproduction in whole or in part is prohibited without the written consent of the copyright owner Document order number: 3111 285 47111 (US-EN)