Cisco 860 Installing Manual page 46

Installing the Cisco 860, 880, 890 ISR
Figure 2-41
1 Wall-mount holes
Insert the screws, with anchors, into the wall. Leave 1/8 inch (0.32 cm) between the screw head and the
Step 2
wall. See
Hang the router on the screw without forcibly pushing towards the wall side. The screw head may
Step 3
damage the protection wall inside. Place the power adapter on a nearby horizontal surface. See
Figure
Cisco Integrated Services Router Hardware Installation Guide
2-46
Wall-mount Holes on the Underside of the Router
1
Figure 2-42.
2-42.
8.200 in.
Chapter 2 Installing the Router
3.673 in.
1
5.961 in.