SL1100
6.
Reinstall the CPU card into the 084M-B1 mother board, and close the CPU Support making sure
tab A locks into place.
7.
Cut and remove the Plastic Knockout for VoIP connector, then replace the Main-Cover and fasten
two screws.
Main-Cover
Hooks
Figure 2-97 Removing the Plastic Knockout and Replacing the Main-Cover
2-70
CPU card
084M-B1 at 1228M KSU
Figure 2-96 Installing the CPU Card
Plastic
Knockout
ISSUE 6.0
CPU support
Two screws
Installation