Table of Contents
Advertisement
Available languages
Available languages
EN
9. Troubleshooting
Beeps and LEDs:
1. The coffee maker beeps in the fol-
lowing situations (Fig.11):
• when you touch the touch-sensitive
button during the heating stage
• when you touch the touch-sensitive
button when the capsule drawer is
out of its housing
• when the capsule insertion door is
not closed properly before dispen-
sing a beverage
• when the used capsule drawer is
full (5 capsules)
2. The touch-sensitive button LED
lights up in the following situa-
tions: (Fig.12):
• open door: alternating red-green
LED
• heating: blinking red LED
• start: steady green LED
• closed unit: steady green LED
• dispensing and open unit: blin-
king green LED
• full drawer: blinking red LED
• broken boiler: blinking yellow
LED
• blocked unit: red-red-green blin-
king LED.
40
9. Risoluzione dei problemi
Full drawer
Dispensing /
Releasing capsule
11
Broken boiler
Blocked unit
Start
Heating
Open door
12
SUMMARY TABLE OF LIGHTS
blinking red LED
(
(
blinking green LED
blinking yellow LED
red-red-green blinking LED
_
steady green LED
(
(
blinking red LED
alternating red-green LED
EN
_
)
)
_
_
)
)
_
41
Hide quick links:
Advertisement
Chapters
Table of Contents
Need help?
Do you have a question about the COURE and is the answer not in the manual?
Questions and answers
La mia macchina cuore..lampeggia rosso rosso verde. Ho letto che è andata in blocco. Ma come posso risolvere il problema?
The red and green flashing lights on your Bialetti COURE machine indicate that the door is open. To fix this issue, ensure that the capsule insertion door is properly closed before attempting to dispense a beverage.
This answer is automatically generated
La mia macchina cuore lampeggia rosso rosso verde quindi in teoria dovrebbe essere bloccata. Come posso fare per sbloccarla?
If your Bialetti COURE machine is flashing red and green, ensure the capsule insertion door is properly closed. The machine will not run the verification cycle if the door is open. Once the door is securely closed, the machine should resume normal operation.
This answer is automatically generated
La mia macchina è rimasta inattiva per un paio d'anni. Ho rimesso l'acqua nel serbatoio e volevo procedere alla pulizia ma il cuore continua a lampeggiare rosso e non ho la possibilità di avviare l'erogazione. Cosa devo fare?
If your Bialetti COURE machine's red light keeps flashing and you cannot start the brewing process after it has been inactive for a couple of years, follow these steps:
1. Check the Capsule Drawer – Ensure it is properly inserted, as the machine beeps if it is out of place.
2. Close the Capsule Insertion Door – Make sure it is fully closed before attempting to start the brewing process.
3. Check for Scale Build-up – If the machine has been unused for a long time, the boiler might be partially obstructed by scale. Perform a descaling cycle to clear any blockages.
4. Verify the Heating Process – A blinking red light indicates the machine is heating. Wait until the light turns steady green before brewing.
5. Ensure the Used Capsule Drawer is Not Full – If it contains five capsules, empty it and reinsert it properly.
If the problem persists after these steps, contact the nearest service center.
This answer is automatically generated