User Manual BDL4230E
1.4.
PORTRAIT MOUNTING
Wall mounting holes
Notes:
• Metric 6 (10mm) screws are needed for wall mounting (not
included).
• The mounting interface should comply with the UL1678
standard in North America. The mounting means should
strong enough to bear the weight of the monitor (approx.
24.5kg without stand).
How to use the logo guider?
How to remove the logo?
Note: When installing the monitor on the wall, please consult a professional technician for proper installing. The manufacturer
accepts no liability for installations not performed by a professional technician.
Note: The remote control sensor should be on the lower side
when rotating your monitor.
RETURN TO THE CONTENTS
Allowable tilting angle in Portrait Mode