Connecting Usb Drives; Using Internal Hdd; Using Sd Memory Cards - Zappiti Mini 4K HDR Quick Start Manual

12
Zappiti Mini 4K HDR Quick Start Guide

Connecting USB Drives

You can connect your USB drives to one of the available USB ports. If you want to play video files, USB 2.0 is
enough to support very high bitrate (up to 350 Mbps). If you want to transfer files, we advise you to use USB 3.0 or
USB Type-C (even faster than USB 3.0).
***Note: A dedicated USB icon located on the home page can help you to detect if the drive is connected correctly.
Power provided by USB ports may not be enough to allow the USB drive to function correctly; depending on the
drive. Please do not disconnect or switch off the USB drive during write(copy) operations.

Using Internal HDD

To insert the internal 3.5'' SATA HDD, please open the HDD rack door, then insert the HDD into the internal
enclosure until 3/4, then complete the installation by closing the door. This operation will complete the installation of
the disk into the rack. The Zappiti media player is compatible with HDDs formatted in NTFS, FAT16, FAT32, HFS,
EXT2/3.
***Note: Please make sure that your HDD is correctly formatted before to insert it in the media player.
Using SD / MMC Memory Cards
To use a memory card, insert it in the memory card slot located on the left side of the media player. It will be detected
as USB device (USB icon on the home page). Some SD memory cards may not be recognized by the player or may
work incorrectly ; in such a case, please use a different model of a memory card.