Led Indication; Start-Up (Default) Inmail Configuration; Section 1 Install The Inmail Blade - NEC univerge sv8100 User Manual

LED I
S 2
ECTION
1.
2.
S
S 3
TART
ECTION
When you install the InMail blade and turn on the system, InMail has the following
default programming:
InMail System Guide
NDICATION
Power up the system.
Remove the grounded wrist strap.
Mount the PZ-VM21 onto CD-CP00.
Install the CD-CP00 in the SV8100 chassis.
Turn the chassis power switch to On.
Check the InMail LED. See
Once the system powers up, check LED1 on the InMail daughter board.
LED1 is viewable on the front panel of the CD-CP00.
LED1 will blink quickly only when the InMail CF is being accessed.
.
- (D ) I
UP EFAULT
Subscriber Mailboxes are enabled for extensions 200-207. The mailbox
numbers are the same as the extension numbers.
The Automated Attendant does not answer outside calls.
The InMail does not answer internal calls.
Figure 1-3 Checking
Figure 1-3 Checking LED1
M C
N AIL ONFIGURATION
Issue 7.00
LED1.
1 - 3