Calibrate Touch Screen (Acp Thinmanager) - Arista ARP-2200AP SERIES User Manual

7.3.

Calibrate Touch Screen (ACP ThinManager)

ACP ThinManager has a touch screen configuration utility that can calibrate a thin client touch screen. The utility can be started three
ways:
 On the thin client, select Start > Program Files > Automation Control Products > Calibrate Touch Screen (or Start >
Program Files > ACP > CalTouchScreen). This is useful because it allows the operator to calibrate the touch screen
without administrative support.
 On the ThinManager Server, highlight the desired terminal in ThinManager and select Tools > Calibrate Touch Screen
from the menu bar. This will launch the calibration on the selected terminal.
 The Calibration Touch Down Time (seconds) setting on the touch screen module will allow the calibration to be triggered by
holding a finger on the touch screen for the amount of time set in the parameter. Refer Touch Screen Modules for details.
 The Term Mon ActiveX can be configured to launch the calibration program. Refer TermMon ActiveX Control for details.
Arista ARP-2200AP User Manual 77 | P a g e